Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

We have added to Splynx a module to manage Huawei GPON from splynx.

To add an OLT, go to Networking → Huawei GPON, it needs IP, ssh port, and login/pass. Also it's so important to set correctly the UPLINK BOARD and the UPLINK INTERFACE.

Image Added


After the OLT is added, we have a menu with 4 different pages.

  • Information
  • Actions
  • VLAN
  • Boards


Informartion - Where you can edit the OLT details.

Image Added


Actions - From actions you can apply the config to the OLT, Set Vlans, Set Uplink, Sync Tariffs or Sync Profiles. It's also possible to run a command.

Image Added


VLAN - From where you can manage vlan and edit their name and vlan number.

Image Added


Boards - From boards is posible to run autofind of boards, and enable auto find on ports from splynx.

Image Added


Once that config is completed, we can find the and assign the ONT to the customer from the customer information page.

Image Added


First select the OLT where the customer is connected.

Image Added


The click, on autofind to discover the diferent ONT from the OLT, it will display the availanle customer units with detalied information, so we can select the correct one.

Image Added


Image Added


Image Added


Then ONT will be added and we can check the status or delete it.

Image Added


Image Added

Image Added


This guide is also explained in the following video, step by step.

Widget Connector
urlhttps://www.youtube.com/watch?v=1rG-kEyk3cE&t=96s